EPM5128LC-2 Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There are 52 I/Os on the board.Terminations of devices are set to 68.QUAD is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.There is a part in the family Programmable Logic Devices.In this chip, the 68 pins are programmed.If you use this device, you will also find LABS INTERCONNECTED BY PIA; 8 LABS; 128 MACROCELLS; 1 EXTERNAL CLOCK; SHARED INPUT/CLOCK.A power supply of 5V is required to operate it.In this case, the maximum supply voltage (Vsup) is 5.25V.The input signals are detected by 7 dedicated inputs.Vsup (supply voltage) must be greater than 4.75V.Ideally, its clock frequency should not exceed 40MHz.It is possible to classify programmable logic as OT PLD.It is recommended that the operating temperature be kept below 70°C.
EPM5128LC-2 Features
52 I/Os
68 pin count
5V power supplies
EPM5128LC-2 Applications
There are a lot of Altera
EPM5128LC-2 CPLDs applications.
- Bootloaders for FPGAs
- Address decoders
- Custom state machines
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
