M4A3-128/64-7YC Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 100-BQFP package.The device is programmed with 64 I/O ports.It is programmed to terminate devices at 100.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is a part of the family Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at 0°C~70°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH® 4A series contain this type of chip.With 100 pins programmed, the chip is ready to use.When using this device, YES is also available.You can find its related parts in the M4A3-128.5000 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 100.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.With a minimal supply voltage of 3V, it operates.Currently, there are 400 Programmable I/Os available.It is important to make sure that the maximum frequency is less than 125MHz.The status of input signals is determined by 2 dedicated inputs.
M4A3-128/64-7YC Features
100-BQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
M4A3-128/64-7YC Applications
There are a lot of Lattice Semiconductor Corporation
M4A3-128/64-7YC CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
