ATF1502AS-7JC44 Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a J package containing it.There are 32 I/Os on the board.Terminations of devices are set to 44.QUAD is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.There is a part in the family Programmable Logic Devices.In this chip, the 44 pins are programmed.If you use this device, you will also find YES.A Surface Mount is mounted on this electronic component.There are 44 pins on it.A power supply of 3.35V is required to operate it.In this case, the maximum supply voltage (Vsup) is 5.25V.It is recommended that the operating temperature exceeds 0°C.A temperature lower than 70°C is recommended for operation.Vsup (supply voltage) must be greater than 4.75V.Ideally, its clock frequency should not exceed 166.7MHz.It is possible to classify programmable logic as EE PLD.
ATF1502AS-7JC44 Features
J package
32 I/Os
44 pin count
44 pins
3.35V power supplies
ATF1502AS-7JC44 Applications
There are a lot of Atmel (Microchip Technology)
ATF1502AS-7JC44 CPLDs applications.
- Bootloaders for FPGAs
- Address decoders
- Custom state machines
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
