CPC7695ZBTR Overview
Board space can be saved by using the 20-SOIC (0.295, 7.50mm Width) package.In order to pack telecommunications equipment, Tape & Reel (TR) is used.Surface Mount is used as telecommunications equipment mounting type.1 circuits are used in this telecom IC .A higher supply voltage for 4.5V~5.5V will improve efficiency.-40°C~110°C is a temperature setting that is reliable when telecom switching comes to performance.The mounting is in the way of Surface Mount.This telecom interface contains 20 pins.The current supply is 2mA.With the voltage of 5V as its supply voltage, designers have a great deal of flexibility.Designers have a great deal of flexibility with this telecom circuit due to its operation with the supply current provided by 2mA.In order to ensure normal operation, the temperature is set to the minimum value of -40°C.The temperature is set at the maximum value of 110°C to ensure normal operation.Telecommunications device is recommended that at least 4.5V voltage be supplied.If the voltage supplied is lower than 5.5V, telecommunications device should be used.The supply current should be kept at 1μA for normal operation.With a resistance of 110Ohm, it works.
CPC7695ZBTR Features
Available in the 20-SOIC (0.295, 7.50mm Width) package
Operating supply voltage of 5V
Operating supply current of 2mA
CPC7695ZBTR Applications
There are a lot of IXYS Integrated Circuits Division CPC7695ZBTR Telecom applications.
- Digital Modems
- Multichannel DS1 Test Equipment
- Interfaces to DS3
- Fiber In The Loop (FITL)
- M13 MUX
- E2 Rates PCM Line Interface
- Digital loop carrier (DLC)
- High-Density T1/E1/J1 interfaces for Multiplexers
- T1 Digital Cross Connects (DSX-1)
- BITS Timing
