Welcome to Hotenda.com Online Store!

logo
userjoin
Home

HI1-0303-2

HI1-0303-2

HI1-0303-2

Intersil (Renesas Electronics America)

Analog Switches BREAK-BEFORE-MAKE 14 Pins 15V CDIP

SOT-23

HI1-0303-2 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Through Hole
Package / Case CDIP
Number of Pins 14
PackagingBulk
JESD-609 Code e0
Pbfree Code no
Number of Terminations 14
ECCN Code EAR99
Resistance 50Ohm
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature125°C
Min Operating Temperature -55°C
Additional FeatureLG-MAX
Number of Functions 2
Supply Voltage 15V
Output SEPARATE OUTPUT
Pin Count14
Operating Supply Voltage28V
Temperature GradeMILITARY
Number of Channels 1
Max Supply Voltage34V
Min Supply Voltage5V
Operating Supply Current 90nA
Nominal Supply Current90μA
Max Supply Current 500μA
Number of Bits 2
Throw Configuration SPDT
Turn On Delay Time300 ns
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 250 ns
Max Dual Supply Voltage20V
Min Dual Supply Voltage 5V
Dual Supply Voltage 18V
Off-state Isolation-Nom 60 dB
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 35Ohm
Length 19.94mm
Height Seated (Max) 5.08mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Contains Lead
In-Stock:1741 items

HI1-0303-2 Product Details

HI1-0303-2 Overview


Shipping overseas is convenient due to the electrical component's packing in CDIP. This packaging method provides high reliability because it uses advanced packaging techniques. 14 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 14 pins. As far as internal resistance is concerned, it has 50Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. Users shouldn't supply more than 34V voltage to the switch device. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 5V. This digital switch can be operated with a current of 90nA. Put voltage above 500μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating voltages range from 28V. Check out the electrical component's additional features, such as the following: LG-MAX. In an environment with a temperature higher than 125°C, the digital switches should not operate. There is 35Ohm resistance between Drain and Source for this electronic part. 2-bits are supported.

HI1-0303-2 Features


1 Channels
90nA Supply Current
Additional Features: LG-MAX
Drain-to-Source resistance: 35Ohm
2-Bit


HI1-0303-2 Applications


There are a lot of Intersil (Renesas Electronics America)
HI1-0303-2 Analog Switches & Multiplexers ICs applications.


  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems
  • Sample-and-hold systems
  • Communication systems
  • Data Acquisition Systems
  • Relay Replacement
  • Battery Powered Systems
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • New designs requiring multiplexer functions

Get Subscriber

Enter Your Email Address, Get the Latest News