CS82C54Z96 Overview
The timer clock is suitable for PLCC package. The programmable timer's frequency is set to 8MHz. It is used to pack in Cut Tape case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 28 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 28 . The number of the chip's terminations sums up to 28. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 6.
CS82C54Z96 Features
Operate frequency at 8MHz
Package / Case: Cut Tape
Max Operating temperature at 0°C
6 Timers/Counters
CS82C54Z96 Applications
There are a lot of Intersil (Renesas Electronics America)
CS82C54Z96 Programmable Timers & Oscillators applications.
- Battery Powered Systems
- Internet of Things (IoT)
- Intruder Detection
- Tamper Detection
- Home Automation Sensors
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
