Name: ISL43L121IRZ
Brand: Intersil Corporation
SKU: ISL43L121IRZ
Price: 2.03000 USD
Availability: InStock

new-10%

ISL43L121IRZ

Manufacturer part number:ISL43L121IRZ

Manufacturer:Intersil Corporation

Description:25ns, 25ns SPST - NC 0.35Ohm DUAL Analog Switches ISL43L121 8, 8 Pins 3nA 1.8V 8-WDFN Exposed Pad

Case Package:SOT-23

Datasheet:ISL43L121IRZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Surface Mount	YES
Mount	Surface Mount
Package / Case	8-WDFN Exposed Pad
Number of Pins	8
Supplier Device Package	8-TDFN (3x3)
Number of Terminals	8
Turn-On Delay Time	25 ns
RoHS	Compliant
Operating Temperature	-40°C ~ 85°C (TA)
Series	--
Packaging	Tube
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	250 mΩ
Terminal Finish	Matte Tin (Sn) - annealed
Max Operating Temperature	85 °C
Min Operating Temperature	-40 °C
HTS Code	8542.39.00.01
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Reach Compliance Code	compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ISL43L121
Output	SEPARATE OUTPUT
Pin Count	8, 8
JESD-30 Code	S-PDSO-N8
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	1.8/3V
Temperature Grade	INDUSTRIAL
Supply Voltage-Min (Vsup)	1.65V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	3.6 V
Min Supply Voltage	1.65 V
Analog IC - Other Type	SPDT
Operating Supply Current	30 nA
Max Supply Current	30 nA
Throw Configuration	SPST
Supply Type	Single
Turn-Off Delay Time	25 ns
-3db Bandwidth	--
On-State Resistance (Max)	0.35Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	3nA
Channel Capacitance (CS(off), CD(off))	182pF, 182pF
On-state Resistance Match-Nom	0.005Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	25ns, 25ns
Charge Injection	-125pC
Channel-to-Channel Matching (ΔRon)	5 mOhm
Crosstalk	-94dB @ 100kHz
Switch-on Time-Max	40ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	1.65 V ~ 3.6 V
Normal Position	NC
Voltage - Supply, Dual (V±)	--
Length	3mm
Height Seated (Max)	0.8mm
Width	3mm
RoHS Status	RoHS Compliant
Radiation Hardening	No

ISL43L121IRZ Product Details

ISL43L121IRZ Overview

Shipping overseas is convenient with the electronic component packed in 8-WDFN Exposed Pad. High reliability is provided by advanced packaging method Tube. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C ~ 85°C (TA) are extended for operation. High-quality output is provided by the electronic component's 2 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. The electronic part body is injected with 8, 8 pins. A SPST - NC switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Try searching with ISL43L121 if you're looking for variants. There is 250 mΩ internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. A voltage higher than 3.6 V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.65 V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 30 nA current would be sufficient. This analog switch requires a voltage of 1.65 V ~ 3.6 V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 30 nA. It is integrated with SPDT analog ICs. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Temperatures above 85 °C should not be used to operate the switches. Suppliers offer a 8-TDFN (3x3) package. For the switch device to function, a voltage of 1.65V is required. Under temperatures above 85°C, this digital multiplexer may malfunction. The operating environment should be set to over -40°C. The -- series contains it.