ICS9112AG-16 Overview
Clock ICs are packaged using the Tape & Reel (TR) method. In the TSSOP package, there is an embedded clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are a total of 8 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. The PLL may become ha70°Cardous once the operating temperature exceeds 70°C. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. A 8 pin is available on the clock PLL. The timing skew of this frequency synthesizer is low at 0.25 nsmax. There are 5 pins configured for enabling high true outputs on this clock generator. 9112-family clock generators are similar. In PLL BASED CLOCK DRIVER logic circuits, this electronic frequency generator is used primarily as a clock component. STANDARD input conditioning converts physical input signals into control signals.
ICS9112AG-16 Features
Available in the TSSOP
Supply voltage of 3.3V
5 true outputs
ICS9112AG-16 Applications
There are a lot of Integrated Device Technology (IDT)
ICS9112AG-16 Clock Generators applications.
- Wide area power system
- Digital circuits
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
