71V30S25TF Overview
RAM, SDR, SRAM is the type of memory it has. The LQFP case contains it. The chip has an 1kB memory. The chip has 64 terminations. In order to operate this memory device, it must be supplied with 3.3V of power. The memory device is enclosed in a package with an 64-pin connector. There are 64 pins on this memory device, which indicates it has 64 memory locations in it. A voltage of 3.3V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 150mA. A memory address is accessed through 2 ports on this chip. I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 3V. Ideally, this part should be supplied with a voltage of at least 3.6V.
71V30S25TF Features
Package / Case: LQFP
64 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
71V30S25TF Applications
There are a lot of Integrated Device Technology (IDT)
71V30S25TF Memory applications.
- cell phones
- eSRAM
- mainframes
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
