AT25320AN-10SU-2.7 Overview
There is a Non-Volatile memory type associated with this device. Tube-cases are available. The 8-SOIC (0.154, 3.90mm Width) case contains it. It is estimated that the memory size on the chip is 32Kb 4K x 8. This device utilizes a EEPROM format memory which is of mainstream design. This device has an extended operating temperature range of -40°C~85°C TA, so it's perfect for a wide range of demanding applications. With 2.7V~5.5V as the supply voltage, it is capable of handling memory ics. The recommended mounting type for this device is Surface Mount. It has a clock frequency of 20MHz. When choosing similar parts, AT25320 is frequently referred to as the device's base part number. It is encased in an 8-pin package that contains this ic memory chip. This memory runs on an 5V operating supply voltage. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 10mA. There must not be a minimum operating temperature of less than -40°C for this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. This memory ics requires a minimum voltage of 2.7V. In order for it to operate properly, its voltage should not exceed 5.5V. As a result of the frequency of this memory chip, data can be processed at a rate of 20MHz. In terms of speed, this memory can operate at a maximum frequency of 10MHz.
AT25320AN-10SU-2.7 Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Operating Supply Voltage:5V
Freguency at 20MHz
20MHz terminals
AT25320AN-10SU-2.7 Applications
There are a lot of Microchip Technology AT25320AN-10SU-2.7 Memory applications.
- networking
- multimedia computers
- servers
- hard disk drive (HDD)
- embedded logic
- networks
- telecommunications
- supercomputers
- DVD disk buffer
- graphics card
