7164S25TPG Overview
In this case, the memory type of the device can be classified as RAM, SDR, SRAM - Asynchronous. Case Bulk is available. An embedded PDIP case surrounds memory ics. It is estimated that the memory size on the chip is 8kB. It is planted on the chip with 28 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 28 pins that allows it to be connected to a computer. The memory device has a total of 28 pins, thus indicating that it has a total of 28 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Through Hole mounting, a straightforward, high-efficiency method of mounting. It is rated 90mA for its nominal supply current when it comes to the memory component. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation.
7164S25TPG Features
Package / Case: PDIP
28 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
7164S25TPG Applications
There are a lot of Integrated Device Technology (IDT)
7164S25TPG Memory applications.
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
