71T75802S133BGG8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the BGA case, memory ics is a single file. A total of 119 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 2.5V will be necessary. A 119-pin package containing this memory device is used to house this device. The memory device in question has 119 pins, thus indicating that it has 119 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 2.5V volt supply voltage. This chip features all the merits of a conventional chip, but it also features PIPELINED ARCHITECTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. A frequency of 133MHz is used to process the data on this memory chip.
71T75802S133BGG8 Features
Package / Case: BGA
119 Pins
Operating Supply Voltage:2.5V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 133MHz
133MHz terminals
71T75802S133BGG8 Applications
There are a lot of Integrated Device Technology (IDT)
71T75802S133BGG8 Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
