7133SA55J8 Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel (TR) case as well. Embedded in the PLCC case, memory ics is a single file. On the chip, there is an 4kB memory, which is the size of the chip's memory. There is a SRAM-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of 0°C ~ 70°C (TA), this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 4.5 V ~ 5.5 V volts. The recommended mounting type for memory ics is Surface Mount. A total of 68 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. Similar parts are frequently selected using the ic memory chip's base part number, IDT7133. A 68-pin package containing this memory device is used to house this device. The memory device in question has 68 pins, thus indicating that it has 68 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 285mA for this memory component. This chip features all the merits of a conventional chip, but it also features AUTOMATIC POWER-DOWN to improve system performance. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. It is an important component of the -- series memory devices used in a variety of applications. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required.
7133SA55J8 Features
Package / Case: PLCC
68 Pins
Operating Supply Voltage:5V
Additional Feature:AUTOMATIC POWER-DOWN
I/O Type: COMMON
7133SA55J8 Applications
There are a lot of Integrated Device Technology (IDT)
7133SA55J8 Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
