7133LA25J Overview
There is a memory type RAM, SDR, SRAM for this type of device. There is a PLCC case embedded in it. Memory size on the chip is 4kB. 68 terminations are planted on the chip. This part supports as many as 1 functions for the comprehensive working procedure. In order to power this memory device, 5V will be necessary. The ic memory chip comes in a package with 68 pins that allows it to be connected to a computer. There are 68 pins on this memory device, which indicates it has 68 memory locations in it. A voltage of 5V is noted as the operating supply voltage for this memory. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. It is rated 270mA for its nominal supply current when it comes to the memory component. In this chip, there are 2 ports providing read and/or write access to one memory address. As for the power supply, this memory chip only needs 5V . This device has COMMON-bit memory mapped I/O port addresses. The minimum operating temperature of this device must not be less than 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. The minimum supply voltage for this part should not be less than 4.5V. There shall be a voltage limit of 5.5V for its operation.
7133LA25J Features
Package / Case: PLCC
68 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
7133LA25J Applications
There are a lot of Integrated Device Technology (IDT) 7133LA25J Memory applications.
- hard disk drive (HDD)
- printers
- graphics card
- multimedia computers
- cell phones
- workstations,
- eDRAM
- networking
- mainframes
- eSRAM
