70V9279S12PRF Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. TQFP case encloses it. There is 64kB of memory on the chip. There are 128 terminations on the chip. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 128-pin package that encloses the device. It is worth noting that this memory device has 128 pins, which indicates it has 128 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 240mA. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3V volts. The operating voltage of the memory ics shall not exceed 3.6V. There is an 33.3MHz frequency with which this memory chip processes data.
70V9279S12PRF Features
Package / Case: TQFP
128 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
Freguency at 33.3MHz
33.3MHz terminals
70V9279S12PRF Applications
There are a lot of Integrated Device Technology (IDT)
70V9279S12PRF Memory applications.
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
