70V9269S15PRF Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a TQFP case. This chip has an 32kB size of memory on it, so a lot of data can be stored on it. The chip contains 128 terminations. An 3.3V supply is required for this ic memory chip to operate properly. A package of 128 pins is used to protect this memory device. The memory device has 128 pins, which means that it has 128 memory locations, which indicates it is an 128-bit device. This memory runs on an 3.3V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 220mA. Each memory address is accessed by one of 2 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 3V. A maximum voltage of 3.6V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 28.5MHz.
70V9269S15PRF Features
Package / Case: TQFP
128 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
Freguency at 28.5MHz
28.5MHz terminals
70V9269S15PRF Applications
There are a lot of Integrated Device Technology (IDT)
70V9269S15PRF Memory applications.
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
