70V658S10BCG Overview
In terms of its memory type, it can be classified as RAM, SDR, SRAM. In addition, memory ics is available in a Bulk case as well. The memory size of the chip is 256kB Mb. 256 terminations are planted on the chip. The comprehensive working procedure of this part involves 1 functions. Memory devices such as this one are designed to be powered by 3.3V and should be used as such. An 256-pin package is used to package this memory device. The memory device in question has 256 pins, thus indicating that it has 256 memory locations that can be accessed. It is noted that the operating supply voltage of this memory is 3.3V. Each memory address is accessed by one of 2 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. Temperatures below 0°C should not be used with this memory ics. Temperatures over 70°C°C are not recommended. In order for it to operate properly, memory ics requires a maximum supply current of 0.5mA . The component is usually referred to as a type of SRAMs. This memory ics should not be operated with a voltage below 3.15V volts at the minimum. Its operating voltage shall not exceed 3.45V.
70V658S10BCG Features
256 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
70V658S10BCG Applications
There are a lot of Integrated Device Technology (IDT) 70V658S10BCG Memory applications.
- graphics card
- personal computers
- Camcorders
- mainframes
- eSRAM
- Cache memory
- workstations,
- eDRAM
- cell phones
- embedded logic
