SST25VF020-20-4I-QAE Overview
In terms of its memory type, it can be classified as Non-Volatile. You can get memory ics in a Tube case. The 8-WDFN Exposed Pad case contains it. On the chip, there is an 2Mb 256K x 8 memory, which is the size of the chip's memory. This device utilizes a FLASH format memory which is of mainstream design. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~85°C TA. The device is capable of handling a supply voltage of 2.7V~3.6V volts. Its recommended mounting type is Surface Mount. As you can see from the diagram, the chip is planted with 8 terminations. This part supports as many as 1 functions for the comprehensive working procedure. The memory device is designed to be supplied with an 3V volt power supply in order to operate properly. It is important to note that the memory has a clock frequency rotation within the range of 20MHz. Similar parts are frequently selected using the ic memory chip's base part number, SST25VF020. This memory device is enclosed in a 8-pin package. There are 8 pins on this memory device, which indicates it has 8 memory locations in it. This memory chip has an operating supply voltage of 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. As far as its nominal supply current is concerned, this memory component carries a rating of 10mA. SST25 series memory ics play a crucial role in the target applications of this part. By integrating with the SPI-type serial bus, this memory transmits data to the processor. Nonvolatile memory arrays require 2.7V programming voltage to change their state.
SST25VF020-20-4I-QAE Features
Package / Case: 8-WDFN Exposed Pad
8 Pins
Operating Supply Voltage:3.3V
SST25VF020-20-4I-QAE Applications
There are a lot of Microchip Technology SST25VF020-20-4I-QAE Memory applications.
- embedded logic
- graphics card
- eDRAM
- cell phones
- eSRAM
- networking
- networks
- data buffer
- personal digital assistants
- Camcorders
