7016S12PF Overview
As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of TQFP, it is embedded within the case. A memory chip with a capacity of 18kB is used on this device. The memory device has an 80-pin package, which encloses it in a small package. I have noticed that the memory device has 80 pins, which indicates that it has 80 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 325mA. The memory chip has 2 ports for granting read/write access to one memory address. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.
7016S12PF Features
Package / Case: TQFP
80 Pins
Operating Supply Voltage:5V
7016S12PF Applications
There are a lot of Integrated Device Technology (IDT)
7016S12PF Memory applications.
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
