CSLA1CH Overview
A Module, Single Pass Through package is used to protect the current sensors from damage. The devices are protected from damage by the Bulk package. It is recommended that these current sensors supply a maximum current of 19mA. No more than 19mA current should be supplied by current sensors. To make these current sensors work, their operating temperature must not fall below -25°C. Current sensors should, however, be set to 85°C for their maximum operating temperature. A current sensor is designed for a current of 19mA. Current sensors have 3 pins. It is possible for the current sensors to supply 91.215kV voltage when they are operating. These sensors should not provide voltages lower than 8V in a DC circuit. A DC circuit should not exceed 16V when the current sensors are connected.
CSLA1CH Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 8V~16V
Sensing Current: 150A
Module, Single Pass Through Package
CSLA1CH Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSLA1CH Current Sensors applications.
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
- General purpose inverters
