ACS722LLCTR-10AB-T Overview
In order to ensure safety, the current sensors are packaged in 8-SOIC (0.154, 3.90mm Width) packages. For protection, these sensors are packaged in the Tape & Reel (TR). If the current supplied by the current sensor is greater than 12mA, then the sensor should be faulty. A 8 termination is present on the current sensors. There are 8 pins in this current sensor. While working, these current sensors can supply a voltage of 3.3V. A voltage of 3V should be set as the minimum voltage supplied by current sensors. In any case, the voltage supplied by current sensors should not exceed 3.6V.
ACS722LLCTR-10AB-T Features
Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 3V~3.6V
Frequency: DC~80kHz
Sensing Current: 10A
8-SOIC (0.154, 3.90mm Width) Package
ACS722LLCTR-10AB-T Applications
There are a lot of Allegro MicroSystems ACS722LLCTR-10AB-T Current Sensors applications.
- Uninterruptable Power Supllies (UPS)
- Industrial Monitoring and Control Systems
- Inverter and H-bridge current measurements
- Proving Switch
- Motor and load control
- Monitor Motor Operation
- Electrical drives
- Power Supplies for welding applications
- Switched Mode Power Supplies(SMPS)
- Switched Mode Power Supplies (SMPS)
