CSDA1BC Overview
For safety reasons, the current sensors are packaged in Module, Single Pass Through packages. The current sensors are packaged in the Bulk in order to prevent damage to the devices. It is recommended that these current sensors supply a maximum current of 12mA. Current sensors should not supply a current greater than 12mA. In order for these current sensors to function properly, the operating temperature must not be below -25°C. However, the maximum operating temperature for the current sensors should be set to 85°C. Current sensors have been designed for 12mA current. During operation, the current sensors may supply a voltage of 16V. The nominal current supplied by current sensors should be 6.5A. Current sensors should produce a voltage of 400mV. The voltage supplied by these sensors should not be lower than 6V in a DC circuit. As long as the voltage supplied by the current sensors is below 16V in the DC circuit, the sensor's output cannot be damaged.
CSDA1BC Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Chassis Mount
Sensor Type: Current Switch
Supply Voltage: 6V~16V
Sensing Current: 7.5A
Module, Single Pass Through Package
CSDA1BC Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSDA1BC Current Sensors applications.
- Inverter and H-bridge current measurements
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
