CSDA1AC Overview
A Module package is used to protect the current sensors from damage. The devices are protected from damage by the Bulk package. It is recommended that these current sensors supply a maximum current of 12mA. No more than 12mA current should be supplied by current sensors. To make these current sensors work, their operating temperature must not fall below -25°C. Current sensors should, however, be set to 85°C for their maximum operating temperature. A current sensor is designed for a current of 12mA. The nominal current supplied by current sensors is 6.5A. A current sensor should produce a voltage of 400mV. These sensors should not provide voltages lower than 6V in a DC circuit. A DC circuit should not exceed 16V when the current sensors are connected.
CSDA1AC Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Current Switch
Supply Voltage: 6V~16V
Sensing Current: 7.5A
Module Package
CSDA1AC Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSDA1AC Current Sensors applications.
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
- General purpose inverters
