L272D2TF Overview
It is packaged in an SOP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 12V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifiers op amp ic can be identified by the fact that this is a type of Operational Amplifiers device. Op amp ic rates 60mV for input offset voltage. There should be no change in the voltage gain at 75dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -25°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 14V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. In order to conduct this part, you will need to provide dual supply voltages of 14V volts.
L272D2TF Features
16 Pins
supply voltage of 12V
75dB voltage gain
L272D2TF Applications
There are a lot of Fairchild (ON Semiconductor)
L272D2TF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
