TLC25L2CPE4 Overview
In order to protect the op amps, a P case is used. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.1mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 29μA and 10 . Maintain 116.9dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. It is recommended that the temperature of this op amp ic should not fall below 0°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 70°C degrees. As a result of this, the buffer amplifier is packed in TUBE. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 16V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 1.4V when using it.
TLC25L2CPE4 Features
8 Pins
supply voltage of 5V
116.9dB voltage gain
TLC25L2CPE4 Applications
There are a lot of Texas Instruments
TLC25L2CPE4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
