DC-SP-01-C-W Overview
A MPU Core module or board is used in the microcontroller.An integral MCU electronics of it is a processor with ARM7TDMI, NS7520 cores that drives the whole thing.Default settings for the microcontroller are -40°C~85°C.There is a flash size 4MB on the MCU electronics.An RJ45 connector has a RJ45 connector type.The MCUs is part of the Digi Connect SP Series of products.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 16MB.I am confident that microprocessor will continue to function accurately as long as microprocessor operates accurately at 55MHz frequency.The architecture it uses at micro controller's core is ARM.Voltage of the operating supply this microcontrollers operates with a 30V volt supply.In this case, FLASH, RAM has been chosen as the value for data storage.The supply current of the MCUs is set to 370mA.
DC-SP-01-C-W Features
Core processor of ARM7TDMI, NS7520
Flash size of 4MB
Core architecture of ARM
DC-SP-01-C-W Applications
There are a lot of Digi DC-SP-01-C-W Microcontroller, Microprocessor, FPGA Modules applications.
- Industrial Instrumentation
- Embedded Instrumentation
- Process Control
- Test and Measurement
- Medical Instrumentation
- Human Machine Control Panel
- Software Defined Radio
- Human Machine Interface
- Medical Devices
- Closed Loop Motor Control
