DC-ME-01T-C Overview
MPU Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of ARM7TDMI, NS7520 cores in it.The default setting of the microcontroller is -40°C~85°C.Flash size on this MCU electronics is 2MB.Connector type RJ45 refers to the type of connector.I would say that MCU chip belongs to the Digi Connect ME? Series.The RAM is reduced to 8MB in order to ensure that the software is able to run normally.A 55MHz-speed motor drives the MCU chip.In order for microprocessor to continue to function accurately, microprocessor must continue to operate exactly at 55MHz frequency as long as microprocessor remains accurate.There is a Module package in microprocessor.At this time, 85°C is the maximum operational temperature.A warmer temperature than -40°C is recommended when operating.The architecture it uses at micro controller's core is ARM.A 3.3V volt supply powers this microcontrollers.During data storage, FLASH, NOR, SDRAM was selected as the value.The package size is Bulk.It is important to note that the MCUs supply current is set to 270mA.The maximum output current of the microchips is 270mA, and microcontroller operates at a voltage of T.
DC-ME-01T-C Features
DC-ME-01T-C Applications
There are a lot of Digi DC-ME-01T-C Microcontroller, Microprocessor, FPGA Modules applications.
