DC-ME-Y413-LX Overview
Module or board type MPU Core describes the microcontroller.With ARM926EJ-S, NS9210 cores, microprocessor chip is powered by a processor.Default settings for the microcontroller are -40°C~80°C.There is a flash size 8MB on the MCU electronics.The connector type RJ45 refers to the connector type.I would say that MCU chip belongs to the Digi Connect ME? Series.A RAM size of 16MB is set in order to ensure that the software runs normally and that MCU chip does not crash.A 75MHz-speed motor drives the MCU chip.In order for microprocessor to continue to function accurately, microprocessor must continue to operate exactly at 75MHz frequency as long as microprocessor remains accurate.At the time of this microprocessor, the maximum operating temperature is 80°C.The temperature should be warmer than -40°C while microprocessor is operating.A ARM architecture underpins micro controller's core.A 3.3V volt supply powers this microcontrollers.A value of FLASH, NOR, SDRAM has been selected for data storage.
DC-ME-Y413-LX Features
Core processor of ARM926EJ-S, NS9210
Flash size of 8MB
Speed of 75MHz
Core architecture of ARM
DC-ME-Y413-LX Applications
There are a lot of Digi DC-ME-Y413-LX Microcontroller, Microprocessor, FPGA Modules applications.
- Industrial Instrumentation
- Closed Loop Motor Control
- Healthcare Monitoring
- Industrial Gateways
- Medical Instrumentation
- Embedded Control Processing
- Weighing Scales
- Industrial Automation
- Industrial Control
- Human Machine Interface
