CY25814SXI Overview
This clock IC is packaged using the Tube method. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. Clock generator ics require a voltage of 3.3V. The input of this clock generator is designed to be Clock, Crystal, Resonator. There is a maximum frequency of 128MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can easily be installed on a panel. As long as you provide 3.135V~3.465V supply voltage, it will work. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. A frequency synthesizer which is compatible with the Clock logic levels is presented here. This electronic component is usually classified as a Clock/Frequency Synthesizer, Frequency Modulator, Spread Spectrum Clock Generator component. It is a 8-bit IC that is designed for microprocessors specifically. CY25814 is the base part number for finding related electronic parts. The frequency synthesizer has 8 pins that are available. The supply voltage should be maintained at 3.3V for high efficiency. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. Elemental destruction can occur when the supply current is exceeded (higher than 35mA)
CY25814SXI Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY25814SXI Applications
There are a lot of Cypress Semiconductor Corp CY25814SXI Clock Generators applications.
- Smartphones
- Clock generation systems
- Mobile telephones
- Line cards used in telephone exchange
- Picocells, femtocells and small cells
- Symbol synchronization
- Local oscillators (LOs)
- Carrier synchronization in wired communication
- FPGA and processor clocks
- Cable television converter boxes
