PA74A Overview
There is a TO-3-8 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. We are approaching the 8h termination of the year. In total, there are 2 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 500μV. The buffer amplifier is capable of operating from a supply current of 18mA . There should be no change in the voltage gain at 100dB. This op amp contains 2 circuits. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -25°C. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 85°C. The operating supply voltage of the buffer op amp is rated at 18V. Under 40V is the minimum supply voltage for this electric component. Over 5V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 20V.
PA74A Features
2 Pins
supply voltage of 15V
100dB voltage gain
PA74A Applications
There are a lot of Cirrus Logic
PA74A Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
