AS1752S

Manufacturer part number:AS1752S

Manufacturer:ams

Description:22ns, 14ns SPST - NC 900mOhm Analog Switches 2.5nA 14-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:AS1752S Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	900mOhm
Max Power Dissipation	1.349W
Reach Compliance Code	unknown
Number of Circuits	4
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Operating Supply Current	100nA
Nominal Supply Current	100nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	16 ns
Supply Type	Single
Turn-Off Delay Time	5 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	2.5nA
Channel Capacitance (CS(off), CD(off))	45pF 45pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	22ns, 14ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-80dB @ 1MHz
Voltage - Supply, Single (V+)	1.6V~3.6V
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free

AS1752S Product Details

AS1752S Overview

Presented in 14-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. Based on SPST - NC switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. This digital multiplexer has 900mOhm internal resistance. The datasheets for the 14 pins explain the functions. Users shouldn't supply more than 3.6V voltage to the switch device. Single supply type digital switch with a low cost. A low voltage of 1.6V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 100nA current. This analog switch requires a voltage of 1.6V~3.6V to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 100nA.