AS1742G Overview
Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there have been 8 terminations. This electronic part offers high-quality output due to its 1 channels. A 1.8V voltage supply should turn on and run the electronic component. It is part of the design of the 8 series that this electronic component is included. These analog multiplexers are built based on SPST - NC switching circuits. The multiplexer consists of 2 circuits. In this multiplexer, the internal resistance is 800mOhm. For functions related to 8 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.6V. In order to operate this switch device, it would need a current of 10nA. A voltage of 1.6V~3.6V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 250mA, damage can occur.
AS1742G Features
1 Channels
Switch Circuit: SPST - NC
10nA Supply Current
-3db Bandwidth: 130MHz
AS1742G Applications
There are a lot of ams AS1742G Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Microprocessor Controlled Analog Systems
- Medical Instrumentation
- CSU
- Avionics
- Fiber In The Loop (FITL)
- Avionics test equipment
- PCMCIA cards
- Channelized and Unchannelized DS3 applications
- Communications systems
