LTC6400IUD-26#TRPBF Overview
In the package, you will find a QFN EP-case to contain the op amp ic. The op amp ic has an array of 16 pins on it. Op amp rates 2mV as input offset voltage. You should keep the voltage gain at 27dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. This electric component can work from a voltage of under 3.5V as far as supply voltage is concerned. A voltage of 2.85V or higher is recommended for the linear amplifier's supply voltage. During testing, the instrumentation amplifier resistance should remain within a range of 57.5Ohm.
LTC6400IUD-26#TRPBF Features
27dB voltage gain
Resistance of 57.5Ohm
LTC6400IUD-26#TRPBF Applications
There are a lot of Analog Devices, Inc.
LTC6400IUD-26#TRPBF Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
