MAX412BEPA+ Overview
There is a DIP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. The input offset voltage is 120μV. The buffer amplifier is capable of operating from a supply current of 2.5mA . It is recommended to keep the voltage gain at 122dB at all times. On the buffer amps, there are 2 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The operating supply voltage of the buffer op amp is rated at 9V. Under 10.5V is the minimum supply voltage for this electric component. Over 4.8V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 5.25V.
MAX412BEPA+ Features
8 Pins
supply voltage of 5V
122dB voltage gain
MAX412BEPA+ Applications
There are a lot of Maxim Integrated
MAX412BEPA+ Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
