AMP04EP Overview
There is a PDIP case in which the instrumentation amplifier is packaged. Buffer amps of this type are called INSTRUMENTATION AMPLIFIER-types. A Rail/Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 150μV. 60dB should be the voltage gain. Op amp ic has 1 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 85°C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. The electrical part is capable of being powered by a voltage of under 30V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 5V. As a general rule, you should conduct this electronic component under dual supply voltages of 15V volts. 4GOhm is the range in which the op amp resistance should lie.
AMP04EP Features
8 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 4GOhm
AMP04EP Applications
There are a lot of Analog Devices, Inc.
AMP04EP Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
