CMP401GRU-REEL Overview
To facilitate transportation, it comes packaged in 16-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, TTL output on this device.The chip is packaged with Tape & Reel (TR) .Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .This comparator has 16 pins.In case you are looking for more pin-to-pin solutions, you may want to search CMP0401 .A quiescent current of 6mA is displayed by this comparator.Normal operation of the device requires 2mA supply current.The voltage formula shows that the part has a voltage gain of 80dB .There is no need to exceed 125°C in terms of temperature.Lower temperatures than -40°C are unsuitable for it.There is a maximum voltage supply on the comparator of 16V .
CMP401GRU-REEL Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 80dB
CMP401GRU-REEL Applications
There are a lot of Analog Devices Inc.
CMP401GRU-REEL linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
