BU7232SFVM-TR Overview
The product is packaged in 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) in order to facilitate transportation.Output type of this comparator is Push-Pull .The part is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .This is a typical comparator of type General Purpose .Currently, it consists of only 2 elements.The device includes 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~105°C in order to prevent malfunction.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search BU7232 for more pin-to-pin solutions.A quiescent current of 25μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 10μA .A power supply of 3V is sufficient for the operation of the device.You are allowed to input a maximum current of 1pA into the device.The voltage gain of the part is indicated by 90dB in the voltage formula.For normal operation, the operating supply voltage must be 2.75V .
BU7232SFVM-TR Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 25μA
Voltage Gain: 90dB
BU7232SFVM-TR Applications
There are a lot of ROHM Semiconductor
BU7232SFVM-TR linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
