ADM825MYRJ-R7 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 240. In a 4.5V supply voltage, the power management conducts. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 5 pins in it. This power management has 5 pins. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Push-Pull during operation. There is a 24μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to ADM825, the base PMIC number. To operate this power management, you will need at least 5V volts of power. Voltage supervisor can work with a supply temperature of 24μA at the most. In total, there are 1 inputs on the power management that can be monitored.
ADM825MYRJ-R7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
24μA operating supply current
ADM825MYRJ-R7 Applications
There are a lot of Analog Devices Inc. ADM825MYRJ-R7 Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Fire equipment power monitoring system
- Battery cars
- Leakage current detection
- Medical-specific isolation transformer
- DC stabilized power supply module
- Dash board
- Detection of phase imbalance
- Power communication system
- Insulation fault location system
