BD4958G-TR Overview
Power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a lot of similarities between this IC power and other Voltage Detector products. A supply voltage of 5.6V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least -300mV for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. A similar IC managements number of the manufacturer can always be found by using BD49, the base power ics number. It is necessary to have 4.9V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 1.98μA can be used. It is one of the well-known BD49xxx series power ic line.
BD4958G-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
BD4958G-TR Applications
There are a lot of ROHM Semiconductor BD4958G-TR Voltage Supervisors applications.
- FPGA design
- Kitchen appliances
- Battery-powered equipment
- Network equipment
- DC stabilized power supply module
- Power distribution systems of ICU
- Multi-voltage system
- Medical-specific isolation transformer
- Leakage current detection
- Automotive power systems
