ADM810RAKS-REEL7 Overview
A total of 3 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a SC-70, SOT-323 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 240. A supply voltage of 3V is used to conduct the PMIC chip. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 3. Power managment ic pin count is 3. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 60μA. To find similar IC managements from the manufacturer, you can always search by ADM810. There is a requirement for 3V power to power this power management. A maximum supply temperature of 60μA can be used with this power management. The power management monitors 1 inputs at once.
ADM810RAKS-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM810RAKS-REEL7 Applications
There are a lot of Analog Devices Inc. ADM810RAKS-REEL7 Voltage Supervisors applications.
- Medical-specific isolation transformer
- Digitally controlled LDO regulators circuit
- Precision measurement
- Display equipment
- Radar
- Microcontroller system
- Microprocessor system
- Radio
- Network equipment
- Electric heating appliances
