BU4223FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes SOT-665 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The supervisor is always powered by a 2.4V volt supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 5 pins are located on this power management. The pins of the power management system count 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 700mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
BU4223FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4223FVE-TR Applications
There are a lot of ROHM Semiconductor BU4223FVE-TR Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- DSP
- Automotive power systems
- Power distribution systems of ICU
- External alarm
- Kitchen appliances
- Solar power charger
- DVR
- Dash board
- Microprocessor system
