ADM809MARTZ-REEL7 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. A supply voltage of 5V is used to conduct the PMIC chip. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 3 pins on power management. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supervisor's supply current is specified to 60μA. A similar IC managements number of the manufacturer can always be found by using ADM809, the base power ics number. The power management must be powered by 5V volts to function properly. A maximum supply temperature of 60μA can be used with this power management. There are 1 inputs monitored at once on the power management.
ADM809MARTZ-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
ADM809MARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM809MARTZ-REEL7 Voltage Supervisors applications.
- Functional modules
- FPGA design
- DSP
- Dash board
- Precision measurement
- Electronics installed in the vehicle
- Utility meter
- Refrigeration
- Electric heating appliances
- Magnetic resonance imaging
