MAX6862UK29+T Overview
There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a SC-74A, SOT-753 package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. Manage ics operate at 2.5V supply voltages. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 5 pins. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least 1.1V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6862, the base power ics number.
MAX6862UK29+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6862UK29+T Applications
There are a lot of Maxim Integrated MAX6862UK29+T Voltage Supervisors applications.
- Solar power charger
- Radio
- Rechargeable batteries
- Satellite navigation
- Kitchen appliances
- Electronics installed in the vehicle
- Battery cars
- Magnetic resonance imaging
- Medical-specific isolation transformer
- DVR
