ADM802LARNZ Overview
A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. A series of 3 channels can be found on this supervisor. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. This IC power shares lots of benefits with other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 5V. Using Surface Mount, IC management is mounted. 8 pins are present in total in this power management. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 100μA. To find similar IC managements from the manufacturer, you can always search by ADM802. The power management can work with a maximum supply temperature of 100μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
ADM802LARNZ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
100μA operating supply current
ADM802LARNZ Applications
There are a lot of Analog Devices Inc. ADM802LARNZ Voltage Supervisors applications.
- Detection of phase loss
- Unattended substation automation
- Detection of phase sequence
- Network equipment
- Consumer electronics
- Military electronics
- Automotive permanent magnet synchronous motors
- Power communication system
- Medical-specific insulation monitor
- Electronics installed in the vehicle
