LTC695ISW#PBF Overview
Power management is mounted through 16 terminals. Packaging is in the form of a Tube. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 16-SOIC (0.295, 7.50mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 16. Pin count of the power management is 16. IC management can only work with a supply voltage of 4.75V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It is always advisable to use LTC695, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 5V volts of power.
LTC695ISW#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.75V
LTC695ISW#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC695ISW#PBF Voltage Supervisors applications.
- Utility meter
- Radar
- Sensitive sensors
- Kitchen appliances
- Fire equipment power monitoring system
- DC stabilized power supply module
- Digitally controlled LDO regulators circuit
- Telecommunications equipment
- Leakage current detection
- Analog circuit
