Name: ADM708TAN
Brand: Hotenda
SKU: ADM708TAN
Price: 1.23000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Additional Feature	MANUAL RESET OPTION
Subcategory	Power Management Circuits
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	ADM708
Output	Push-Pull, Push-Pull
Pin Count	8
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	250μA
Nominal Supply Current	350μA
Power Dissipation	727mW
Max Supply Current	350μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active High/Active Low
Voltage - Threshold	3.08V
Reset Timeout	160ms Minimum
Min Reset Threshold Voltage	3V
Max Reset Threshold Voltage	3.15V
Threshold Voltage	+3.08V
Undervoltage Threshold	3V
Overvoltage Threshold	3.15V
Number of Monitored Inputs	1
Reset Delay Time	280 ms
Height Seated (Max)	5.33mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM708TAN Product Details

ADM708TAN Overview

A total of 8 terminals are used to mount this power management. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management conducts at a voltage of 5V. Through Hole mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 8 pins on power management. This power management system has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Through Hole. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Push-Pull. The supply current of the power management is 250μA. There are also other features in the software such as [0], just to mention a few. It is always advisable to use ADM708, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature voltage supervisor can handle is 350μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.