Name: ADM705AN
Brand: Hotenda
SKU: ADM705AN
Price: 1.72000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Subcategory	Power Management Circuits
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT APPLICABLE
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	NOT APPLICABLE
Base Part Number	ADM705
Output	Push-Pull, Totem Pole
Pin Count	8
Qualification Status	Not Qualified
Power Supplies	5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	250μA
Nominal Supply Current	250μA
Power Dissipation	727mW
Max Supply Current	250μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	4.65V
Reset Timeout	160ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Number of Monitored Inputs	1
Reset Delay Time	280 ms
Height	4.95mm
Length	10.16mm
Width	7.11mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM705AN Product Details

ADM705AN Overview

There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tube model. Please refer to this PMIC for 1 functions. There are a total of 2 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at NOT APPLICABLE. IC management conducts in a 5V-voltage supply. Using Through Hole, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 250μA. To find similar IC managements from the manufacturer, you can always search by ADM705. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 250μA can be used. On the power management, 1 inputs are monitored.