Name: ADM690AARN
Brand: Hotenda
SKU: ADM690AARN
Price: 2.68000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Subcategory	Power Management Circuits
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADM690
Output	Push-Pull, Totem Pole
Pin Count	8
Power Supplies	5V
Number of Channels	3
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	100μA
Nominal Supply Current	100μA
Power Dissipation	500mW
Max Supply Current	100μA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	4.65V
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.75V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.75V
Number of Monitored Inputs	1
Reset Delay Time	280 ms
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADM690AARN Product Details

ADM690AARN Overview

A total of 8 terminals are used to mount this power management. Tube-packaging is used. In this IC power you will find 1 functions for you to refer to. There are 3 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 240. When 5V is applied to the power ic, it conducts. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. Power managment ic pin count is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 100μA. It is always advisable to use ADM690, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power. The power management can work with a maximum supply temperature of 100μA. In total, there are 1 inputs on the power management that can be monitored.