TPS389030QDSERQ1 Overview
This power management consists of 6 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for 6-WFDFN functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. 6 pins make up the power management. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. You can always use TPS389030, the base supervisor number, to search for similar PMICs of the manufacturer. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.
TPS389030QDSERQ1 Features
Simple Reset/Power-On Reset type
TPS389030QDSERQ1 Applications
There are a lot of Texas Instruments TPS389030QDSERQ1 Voltage Supervisors applications.
- Efficient information transmission
- Kitchen appliances
- Smart meter
- emergency room
- Automotive permanent magnet synchronous motors
- DSP
- Data storage applications
- Radar
- Set top box
- Insulation fault location system
