ADM6713MAKS-REEL7 Overview
In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to power management for SC-82A, SOT-343 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Using Surface Mount, IC management is mounted. Taking into account all of the pins, this power management has a total of 4. Pin count of the power management is 4. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is estimated that the voltage supervisor's supply current is 35μA. You can always use ADM6713, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
ADM6713MAKS-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
35μA operating supply current
ADM6713MAKS-REEL7 Applications
There are a lot of Analog Devices Inc. ADM6713MAKS-REEL7 Voltage Supervisors applications.
- Detection of phase loss
- Solar power charger
- Network equipment
- Digitally controlled LDO regulators circuit
- Detection of phase sequence
- Electrical fire monitoring system
- Low voltage/high power - AI, GPU
- Battery cars
- Power distribution systems of operating room
- Fire equipment power monitoring system
